Waste Incineration Furnaces

Home » Furnace & Kiln Solution » Waste Incineration Furnaces

Overview of Waste Incinerator Furnace

Waste incinerator furnace is a kind of equipment that is used for garbage incineration. There are kinds of incinerator furnace including plasma decomposing furnace, rotary kiln incinerator, grate furnace, chain grate furnace and collaborative disposal of rotary kiln in cement plant. They all can achieve certain incineration thermal efficiency and the purpose of waste treatment. The waste incinerator furnace consists of four major systems, pre-treatment system, incineration system, smoke biochemical dust removal system, and gas generator. It integrates automatic feeding, screening, drying, incineration, ash cleaning, dust removal, and automated control.

waste incineration process

Refractories for Waste Incineration Furnace

AGRM Refractory is one of the most professional refractory material production enterprises in China, our refractory products are widely used in construction of waste incineration furnaces. And you should select the appropriate refractory material to suit the different position of the furnace to ensure normal operation.

Refractories for waste incineration furnaces have characteristics of thermal shock resistance, high wear resistance, good resistance to alkaline corrosion and acid corrosion, and resistance to various chemical corrosion and peeling. The working temperature of refractories for waste incineration furnace is generally not more than 1300 ℃, and corrosive gases can cause serious damage to the waste incinerator furnace in the process of garbage incineration. Therefore, refractory materials are widely used in the construction and maintenance of waste incineration furnaces. The refractory materials used in waste incineration furnaces mainly include  refractory bricks and refractory castables.

Refractory Bricks for Waste Incineration Furnace

Magnesia Brick

magnesia bricks

Magnesia bricks, made from magnesia (MgO), are widely used in waste incineration furnaces. They offer excellent resistance to high temperatures and alkali attacks, making them suitable for areas where waste combustion occurs.

Get a Quote Now!

High Alumina Brick

High alumina bricks, composed primarily of alumina (Al2O3), are used in various zones of waste incineration furnaces. They provide good thermal resistance and chemical stability. High alumina bricks are commonly used in the combustion chamber, where the waste is burned, and in areas exposed to high temperatures and corrosive gases.

high alumina brick

Silicon Carbide Brick

silicon carbide brick

Silicon carbide bricks have excellent thermal conductivity and resistance to thermal shock. They are used in specific areas of waste incineration furnaces where extreme temperatures and severe conditions are encountered, such as the combustion zone.

Chrome-Magnesia Brick

Chrome-magnesia bricks, made from a combination of magnesia and chrome ore, offer high-temperature resistance and excellent corrosion resistance to acidic gases generated during waste incineration. They are commonly used in the lower sections of waste incineration furnaces.

chrome magnesia brick

Insulating Brick

insulation brick

Insulating bricks are lightweight and have low thermal conductivity. They are used in the outer lining or insulation layers of waste incineration furnaces to reduce heat loss and improve energy efficiency. Lightweight fireclay, vermiculite, or perlite-based insulating bricks are commonly used.

Refractory Castables for Waste Incineration Furnace

Refractory castable is unshaped refractory material that doesn’t need firing and features fluidness after adding water. Refractory castable has the characteristics of good wear resistance, high thermal conductivity, thermal shock resistance, good corrosion resistance, good sealing performance, and good high-temperature strength. Therefore, it is widely used in waste incineration furnaces construction and maintenance to ensure the furnace quality and extend service life. The refractory castables used in waste incineration furnaces mainly include followings.


Low Cement Castable

Low cement castables contain a lower amount of calcium aluminate cement compared to conventional castables. They exhibit superior mechanical strength, high temperature resistance, and reduced water requirement for installation. Low cement castables are suitable for areas of the incineration furnace exposed to severe thermal and chemical stresses.

High Alumina Castable

High alumina castables are made from high-alumina aggregates and binders. They offer excellent thermal shock resistance, high temperature stability, and resistance to chemical attacks from acidic gases generated during the incineration process.

Silicon Carbide Castable

Silicon carbide castables are composed of silicon carbide grains and binders. They have excellent thermal conductivity, high temperature strength, and resistance to thermal shock. Silicon carbide castables are commonly used in areas of the waste incineration furnace subjected to high temperatures and corrosive environments.

Mullite Castable

Mullite castables are made from mullite aggregates and binders. They offer good thermal shock resistance and thermal insulation properties. Mullite castables are suitable for the hot face lining of the waste incineration furnace, providing effective heat containment and reducing heat loss.

Insulating Castable

Insulating castables are lightweight and have low thermal conductivity. They are used as an insulating layer in the lining of waste incineration furnaces to reduce heat loss and improve energy efficiency. Insulating castables can be made from materials such as lightweight aggregates, vermiculite, or perlite.

Why Choose AGRM Waste Incineration Furnace

Waste incineration furnace has important meanings in environmental protection. And you should choose appropriate refractory materials to maintain the normal  operation of the furnace. AGRM is major engaged in refractory materials development, production and sales, industrial furnace for the design, manufacture and maintenance services.

The service chain runs through the entire project lifecycle, including early consultation, scheme design, research and development production, furnace construction, and safety production. It meets different process requirements and creates value for customers by optimizing the combination of various products. Until now, our products have covered 31 provinces in China, and successfully served more than 3000 customers in the United States, Canada, South Korea, Japan, Chile, Greece, Mongolia and other countries. If you have any needs, please contact with us.

WhatsApp Message